Mercurial Repositories > micropython / file diff

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/MicroPython/machine.py	Sun Aug 25 19:25:37 2019 +0200
@@ -0,0 +1,315 @@
+# -*- coding: utf-8 -*-
+
+# Copyright (c) 2019 Detlev Offenbach <detlev@die-offenbachs.de>
+#
+
+"""
+Module containing stubs for API generation of the def 'machine' module.
+"""
+
+IDLE = 0
+SLEEP = 0
+DEEPSLEEP = 0
+PWRON_RESET = 0
+HARD_RESET = 0
+WDT_RESET = 0
+DEEPSLEEP_RESET = 0
+SOFT_RESET = 0
+WLAN_WAKE = 0
+PIN_WAKE = 0
+RTC_WAKE = 0
+
+def reset():
+    pass
+
+def reset_cause():
+    pass
+
+def disable_irq():
+    pass
+
+def enable_irq(state):
+    pass
+
+def freq():
+    pass
+
+def idle():
+    pass
+
+def sleep():
+    pass
+
+def lightsleep(time_ms=None):
+    pass
+
+def deepsleep(time_ms=None):
+    pass
+
+def wake_reason():
+    pass
+
+def unique_id():
+    pass
+
+def time_pulse_us(pin, pulse_level, timeout_us=1000000):
+    pass
+
+def rng():
+    pass
+
+class Pin():
+    IN = 0
+    OUT = 0
+    OPEN_DRAIN = 0
+    ALT = 0
+    ALT_OPEN_DRAIN = 0
+    PULL_UP = 0
+    PULL_DOWN = 0
+    PULL_HOLD = 0
+    LOW_POWER = 0
+    MED_POWER = 0
+    HIGH_POWER = 0
+    IRQ_FALLING = 0
+    IRQ_RISING = 0
+    IRQ_LOW_LEVEL = 0
+    IRQ_HIGH_LEVEL = 0
+
+    def __init__(self, id, mode=-1, pull=-1, *, value, drive, alt):
+        pass
+    
+    def init(self, mode=-1, pull=-1, *, value, drive, alt):
+        pass
+    
+    def value(self, x=None):
+        pass
+    
+    def on(self):
+        pass
+    
+    def off(self):
+        pass
+    
+    def mode(self, mode=-1):
+        pass
+    
+    def pull(self, pull=-1):
+        pass
+    
+    def drive(self, drive=None):
+        pass
+    
+    def irq(self, handler=None, trigger=(IRQ_FALLING | IRQ_RISING), *,
+            priority=1, wake=None, hard=False):
+        pass
+
+class Signal():
+    def __init__(self, pin, *, invert=False):
+        pass
+    
+    def value(self, x=None):
+        pass
+    
+    def on(self):
+        pass
+    
+    def off(self):
+        pass
+
+class ADC():
+    def __init__(self, id=0, *, bits=12):
+        pass
+    
+    def channel(self, id, *, pin):
+        pass
+    
+    def init(self):
+        pass
+    
+    def deinit(self):
+        pass
+
+class ADCChannel():
+    def value(self):
+        pass
+    
+    def init(self):
+        pass
+    
+    def deinit(self):
+        pass
+
+def adcchannel():
+    pass
+
+class UART():
+    RX_ANY = 0
+    
+    def __init__(self, id, baudrate=9600, bits=8, parity=None, stop=1,
+                 **kwargs):
+        pass
+    
+    def init(baudrate=9600, bits=8, parity=None, stop=1, **kwargs):
+        pass
+    
+    def deinit(self):
+        pass
+    
+    def any(self):
+        pass
+    
+    def read(self, nbytes=None):
+        pass
+    
+    def readinto(self, buf, nbytes=None):
+        pass
+    
+    def readline(self):
+        pass
+    
+    def write(self, buf):
+        pass
+    
+    def sendbreak(self):
+        pass
+    
+    def irq(self, trigger, priority=1, handler=None, wake=IDLE):
+        pass
+
+class SPI():
+    MASTER = 0
+    MSB = 0
+    LSB = 0
+    
+    def __init__(self, id, baudrate=1000000, *, polarity=0, phase=0, bits=8,
+                 firstbit=MSB, sck=None, mosi=None, miso=None,
+                 pins=("SCK", "MOSI", "MISO")):
+        pass
+    
+    def init(self, baudrate=1000000, *, polarity=0, phase=0, bits=8,
+             firstbit=MSB, sck=None, mosi=None, miso=None,
+             pins=("SCK", "MOSI", "MISO")):
+        pass
+    
+    def deinit(self):
+        pass
+    
+    def read(self, nbytes, write=0x00):
+        pass
+    
+    def readinto(self, buf, write=0x00):
+        pass
+    
+    def write(self, buf):
+        pass
+    
+    def write_readinto(self, write_buf, read_buf):
+        pass
+
+class I2C():
+    def __init__(self, id=-1, *, scl, sda, freq=400000):
+        pass
+    
+    def init(self, scl, sda, *, freq=400000):
+        pass
+    
+    def deinit(self):
+        pass
+    
+    def scan(self):
+        pass
+    
+    def start(self):
+        pass
+    
+    def stop(self):
+        pass
+    
+    def readinto(self, buf, nack=True):
+        pass
+    
+    def write(self, buf):
+        pass
+    
+    def readfrom(self, addr, nbytes, stop=True):
+        pass
+    
+    def readfrom_into(self, addr, buf, stop=True):
+        pass
+    
+    def writeto(self, addr, buf, stop=True):
+        pass
+    
+    def writevto(self, addr, vector, stop=True):
+        pass
+    
+    def readfrom_mem(self, addr, memaddr, nbytes, *, addrsize=8):
+        pass
+    
+    def readfrom_mem_into(self, addr, memaddr, buf, *, addrsize=8):
+        pass
+    
+    def writeto_mem(self, addr, memaddr, buf, *, addrsize=8):
+        pass
+
+class RTC():
+    ALARM0 = 0
+    
+    def __init__(self, id=0, datetime=None):
+        pass
+    
+    def init(self, datetime):
+        pass
+    
+    def now(self):
+        pass
+    
+    def deinit(self):
+        pass
+    
+    def alarm(self, id, time, *, repeat=False):
+        pass
+    
+    def alarm_left(self, alarm_id=0):
+        pass
+    
+    def cancel(self, alarm_id=0):
+        pass
+    
+    def irq(self, *, trigger, handler=None, wake=IDLE):
+        pass
+
+class Timer():
+    ONE_SHOT = 0
+    PERIODIC = 0
+    
+    def __init__(self, id, *, mode=PERIODIC, period=-1, callback=None):
+        pass
+    
+    def init(self, *, mode=PERIODIC, period=-1, callback=None):
+        pass
+    
+    def deinit(self):
+        pass
+
+class WDT():
+    def __init__(self, id=0, timeout=5000):
+        pass
+    
+    def feed(self):
+        pass
+
+class SD():
+    def __init__(self, id=0, pins=('GP10', 'GP11', 'GP15')):
+        pass
+    
+    def init(self, id=0, pins=('GP10', 'GP11', 'GP15')):
+        pass
+    
+    def deinit(self):
+        pass
+
+class SDcard():
+    def __init__(self, lot=1, width=1, cd=None, wp=None, sck=None, miso=None,
+                 mosi=None, cs=None):
+        pass