diff -r bd5cd5858503 -r cdc1b6692766 eric6/MicroPython/UF2FlashDialog.py
--- a/eric6/MicroPython/UF2FlashDialog.py Sun Mar 21 14:17:16 2021 +0100
+++ b/eric6/MicroPython/UF2FlashDialog.py Sun Mar 21 18:00:30 2021 +0100
@@ -373,6 +373,38 @@
"firmware": "CircuitPython",
},
+ "circuitpython_rp2040": {
+ "volumes": {
+ (0x239A, 0x80F4): [
+ "RPI-RP2", # Raspberry Pi Pico loaded with CircuitPython
+ ],
+ },
+ "instructions": QCoreApplication.translate(
+ "UF2FlashDialog",
+ "<h3>Pi Pico (RP2040) Board</h3>"
+ "<p>In order to prepare the board for flashing follow these"
+ " steps:</p><ol>"
+ "<li>Enter 'bootloader' mode (board <b>without</b> RESET button):"
+ "<ul>"
+ "<li>Plug in your board while holding the BOOTSEL button.</li>"
+ "</ul>"
+ "Enter 'bootloader' mode (board <b>with</b> RESET button):"
+ "<ul>"
+ "<li>hold down RESET</li>"
+ "<li>hold down BOOTSEL</li>"
+ "<li>release RESET</li>"
+ "<li>release BOOTSEL</li>"
+ "</ul></li>"
+ "<li>Wait until the device has entered 'bootloader' mode.</li>"
+ "<li>Ensure the boot volume is available (this may require"
+ " mounting it).</li>"
+ "<li>Select the firmware file to be flashed and click the"
+ " flash button.</li>"
+ "</ol>"
+ ),
+ "firmware": "CircuitPython",
+ },
+
"rp2040": {
"volumes": {
(0x0000, 0x0000): [
@@ -384,7 +416,17 @@
"<h3>Pi Pico (RP2040) Board</h3>"
"<p>In order to prepare the board for flashing follow these"
" steps:</p><ol>"
+ "<li>Enter 'bootloader' mode (board <b>without</b> RESET button):"
+ "<ul>"
"<li>Plug in your board while holding the BOOTSEL button.</li>"
+ "</ul>"
+ "Enter 'bootloader' mode (board <b>with</b> RESET button):"
+ "<ul>"
+ "<li>hold down RESET</li>"
+ "<li>hold down BOOTSEL</li>"
+ "<li>release RESET</li>"
+ "<li>release BOOTSEL</li>"
+ "</ul></li>"
"<li>Wait until the device has entered 'bootloader' mode.</li>"
"<li>Ensure the boot volume is available (this may require"
" mounting it).</li>"
@@ -421,7 +463,7 @@
continue
for board in SupportedUF2Boards:
- if not boardType or (board == boardType):
+ if not boardType or (board.startswith(boardType)):
if (vid, pid) in SupportedUF2Boards[board]["volumes"]:
foundDevices.append((
board,
@@ -524,6 +566,9 @@
self.devicesComboBox.setItemData(1, self.__manualType,
self.DeviceTypeRole)
elif len(devices) == 1:
+ # set the board type to the found one
+ self.__boardType = devices[0][0]
+
self.devicesComboBox.addItem(devices[0][1])
self.devicesComboBox.setItemData(
0, devices[0][0], self.DeviceTypeRole)
@@ -675,12 +720,14 @@
htmlText += "<hr/>" + SupportedUF2Boards[boardType]["instructions"]
self.infoEdit.setHtml(htmlText)
- def __showNoVolumeInformation(self, volumes):
+ def __showNoVolumeInformation(self, volumes, boardType):
"""
Private method to show information about the expected boot volume(s).
@param volumes list of expected volume names
@type list of str
+ @param boardType type of the board to show instructions for
+ @type str
"""
self.infoLabel.setText(self.tr("Boot Volume not found:"))
@@ -700,6 +747,15 @@
"<ul><li>{0}</li></ul>"
"<p>Press <b>Refresh</b> when ready.</p>"
).format("</li><li>".join(sorted(volumes)))
+
+ if boardType:
+ htmlText += self.tr(
+ "<h4>Reset Instructions</h4>"
+ "<p>Follow the instructions below to set the board into"
+ " 'bootloader' mode. Press <b>Refresh</b> when ready.</p>"
+ )
+ htmlText += "<hr/>" + SupportedUF2Boards[boardType]["instructions"]
+
self.infoEdit.setHtml(htmlText)
def __showMultipleVolumesInformation(self, volumePaths):
@@ -757,6 +813,10 @@
"""
Private slot to refresh the dialog.
"""
+ # special treatment for RPi Pico
+ if self.__boardType == "circuitpython_rp2040":
+ self.__boardType = "rp2040"
+
self.__populate()
@pyqtSlot(int)
@@ -784,7 +844,7 @@
foundVolumes += Utilities.findVolume(volume, findAll=True)
if len(foundVolumes) == 0:
- self.__showNoVolumeInformation(volumes)
+ self.__showNoVolumeInformation(volumes, boardType)
self.bootPicker.clear()
elif len(foundVolumes) == 1:
self.bootPicker.setText(foundVolumes[0])
