diff -r 5425a9072300 -r 5af9c426c46b eric6/i18n/eric6_es.ts
--- a/eric6/i18n/eric6_es.ts Fri Feb 12 16:15:18 2021 +0100
+++ b/eric6/i18n/eric6_es.ts Fri Feb 12 19:16:12 2021 +0100
@@ -2982,27 +2982,27 @@
<translation type="obsolete">Los archivos de Python para dispositivos CircuitPython se almacenan en el dispositivo. Por tanto, para editar esos archivos se necesita tener el dispositivo conectado. Hasta que se conecte un dispositivo, se utilizará el directorio estándar.</translation>
</message>
<message>
- <location filename="../MicroPython/CircuitPythonDevices.py" line="250"/>
+ <location filename="../MicroPython/CircuitPythonDevices.py" line="247"/>
<source>Flash CircuitPython Firmware</source>
<translation>Flashear Firmware de CircuitPython</translation>
</message>
<message>
- <location filename="../MicroPython/CircuitPythonDevices.py" line="279"/>
+ <location filename="../MicroPython/CircuitPythonDevices.py" line="276"/>
<source>Install Library Files</source>
<translation>Instalar Archivos de Biblioteca</translation>
</message>
<message>
<location filename="../MicroPython/CircuitPythonDevices.py" line="229"/>
<source>Please reset the device to bootloader mode and confirm when ready.</source>
- <translation>Por favor, restablezca el dispositivo a modo de cargador de arranque y confirme cuando esté listo.</translation>
- </message>
- <message>
- <location filename="../MicroPython/CircuitPythonDevices.py" line="267"/>
+ <translation type="obsolete">Por favor, restablezca el dispositivo a modo de cargador de arranque y confirme cuando esté listo.</translation>
+ </message>
+ <message>
+ <location filename="../MicroPython/CircuitPythonDevices.py" line="264"/>
<source>The device volume "<b>{0}</b>" is not available. Ensure it is mounted properly and try again.</source>
<translation>El volumen de dispositivo "<b>{0}</b>" no está disponible. Asegúrese de que está montado correctamente e inténtelo de nuevo.</translation>
</message>
<message>
- <location filename="../MicroPython/CircuitPythonDevices.py" line="279"/>
+ <location filename="../MicroPython/CircuitPythonDevices.py" line="276"/>
<source>Compiled Python Files (*.mpy);;Python Files (*.py);;All Files (*)</source>
<translation>Archivos Compilados de Python (*.mpy);;Archivos de Python (*.py);;Todos los Archivos (*)</translation>
</message>
@@ -3012,17 +3012,17 @@
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="../MicroPython/CircuitPythonDevices.py" line="309"/>
+ <location filename="../MicroPython/CircuitPythonDevices.py" line="306"/>
<source>CircuitPython Firmware</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="../MicroPython/CircuitPythonDevices.py" line="311"/>
+ <location filename="../MicroPython/CircuitPythonDevices.py" line="308"/>
<source>CircuitPython Libraries</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="../MicroPython/CircuitPythonDevices.py" line="250"/>
+ <location filename="../MicroPython/CircuitPythonDevices.py" line="247"/>
<source><p>Teensy 4.0 and Teensy 4.1 do not support the UF2 bootloader. Please use the 'Teensy Loader' application to flash CircuitPython. Make sure you downloaded the CircuitPython .hex file.</p><p>See <a href="{0}">the PJRC Teensy web site</a> for details.</p></source>
<translation type="unfinished"></translation>
</message>
@@ -3032,77 +3032,62 @@
<message>
<location filename="../MicroPython/CircuitPythonFirmwareSelectionDialog.ui" line="14"/>
<source>Flash CircuitPython Firmware</source>
- <translation>Flashear Firmware de CircuitPython</translation>
+ <translation type="obsolete">Flashear Firmware de CircuitPython</translation>
</message>
<message>
<location filename="../MicroPython/CircuitPythonFirmwareSelectionDialog.ui" line="23"/>
<source>Select the board type or 'Manual'</source>
- <translation>Seleccionar el tipo de placa o 'Manual'</translation>
+ <translation type="obsolete">Seleccionar el tipo de placa o 'Manual'</translation>
</message>
<message>
<location filename="../MicroPython/CircuitPythonFirmwareSelectionDialog.ui" line="36"/>
<source>Enter the path of the CircuitPython firmware file</source>
- <translation>Introducir la ruta del archivo de firmware CircuitPython</translation>
+ <translation type="obsolete">Introducir la ruta del archivo de firmware CircuitPython</translation>
</message>
<message>
<location filename="../MicroPython/CircuitPythonFirmwareSelectionDialog.ui" line="56"/>
<source>Firmware:</source>
- <translation>Firmware:</translation>
+ <translation type="obsolete">Firmware:</translation>
</message>
<message>
<location filename="../MicroPython/CircuitPythonFirmwareSelectionDialog.ui" line="63"/>
<source>Boot Path:</source>
- <translation>Ruta de Arranque:</translation>
+ <translation type="obsolete">Ruta de Arranque:</translation>
</message>
<message>
<location filename="../MicroPython/CircuitPythonFirmwareSelectionDialog.ui" line="70"/>
<source>Board Type:</source>
- <translation>Tipo de Placa:</translation>
+ <translation type="obsolete">Tipo de Placa:</translation>
</message>
<message>
<location filename="../MicroPython/CircuitPythonFirmwareSelectionDialog.ui" line="80"/>
<source>Enter the path to the device in bootloader mode</source>
- <translation>Introducir la ruta al dispositivo en modo de cargador de arranque</translation>
+ <translation type="obsolete">Introducir la ruta al dispositivo en modo de cargador de arranque</translation>
</message>
<message>
<location filename="../MicroPython/CircuitPythonFirmwareSelectionDialog.ui" line="100"/>
<source>Press to search the selected volume</source>
- <translation>Pulsar para buscar el volumen seleccionado</translation>
+ <translation type="obsolete">Pulsar para buscar el volumen seleccionado</translation>
</message>
<message>
<location filename="../MicroPython/CircuitPythonFirmwareSelectionDialog.py" line="116"/>
<source>CircuitPython Firmware Files (*.uf2);;All Files (*)</source>
- <translation>Archivos de Firmware CircuitPython (*.uf2);;Todos los Archivos (*)</translation>
+ <translation type="obsolete">Archivos de Firmware CircuitPython (*.uf2);;Todos los Archivos (*)</translation>
</message>
<message>
<location filename="../MicroPython/CircuitPythonFirmwareSelectionDialog.py" line="170"/>
<source>Select Path to Device</source>
- <translation>Seleccionar Ruta al Dispositivo</translation>
+ <translation type="obsolete">Seleccionar Ruta al Dispositivo</translation>
</message>
<message>
<location filename="../MicroPython/CircuitPythonFirmwareSelectionDialog.py" line="170"/>
<source><p>The device volume <b>{0}</b> could not be found. Is the device in 'bootloader' mode and mounted?</p> <p>Alternatively select the "Manual Select" entry and enter the path to the device below.</p></source>
- <translation><p>El volumen de dispositivo <b>{0}</b> no se puede encontrar. ¿Está dicho dispositivo en modo 'cargador de arranque' y montado?</p> <p>Alternativamente, seleccionar la opción "Selección Manuale introducir la ruta al dispositivo más abajo.</p></translation>
+ <translation type="obsolete"><p>El volumen de dispositivo <b>{0}</b> no se puede encontrar. ¿Está dicho dispositivo en modo 'cargador de arranque' y montado?</p> <p>Alternativamente, seleccionar la opción "Selección Manuale introducir la ruta al dispositivo más abajo.</p></translation>
</message>
<message>
<location filename="../MicroPython/CircuitPythonFirmwareSelectionDialog.py" line="132"/>
<source>Manual Select</source>
- <translation>Selección Manual</translation>
- </message>
- <message>
- <location filename="../MicroPython/CircuitPythonFirmwareSelectionDialog.py" line="32"/>
- <source>--- Others ---</source>
- <translation type="unfinished"></translation>
- </message>
- <message>
- <location filename="../MicroPython/CircuitPythonFirmwareSelectionDialog.py" line="158"/>
- <source>There are multiple devices in 'bootloader' mode and mounted. Please make sure, that only one device is prepared for flashing.</source>
- <translation type="unfinished"></translation>
- </message>
- <message>
- <location filename="../MicroPython/CircuitPythonFirmwareSelectionDialog.py" line="128"/>
- <source>--- Local Devices ---</source>
- <translation type="unfinished"></translation>
+ <translation type="obsolete">Selección Manual</translation>
</message>
</context>
<context>
@@ -17616,17 +17601,17 @@
<translation>ESP8266, ESP32</translation>
</message>
<message>
- <location filename="../MicroPython/EspDevices.py" line="176"/>
+ <location filename="../MicroPython/EspDevices.py" line="185"/>
<source>Erase Flash</source>
<translation>Borrar Flash</translation>
</message>
<message>
- <location filename="../MicroPython/EspDevices.py" line="216"/>
+ <location filename="../MicroPython/EspDevices.py" line="225"/>
<source>Flash MicroPython Firmware</source>
<translation>Flash MicroPython Firmware</translation>
</message>
<message>
- <location filename="../MicroPython/EspDevices.py" line="247"/>
+ <location filename="../MicroPython/EspDevices.py" line="256"/>
<source>Flash Additional Firmware</source>
<translation>Flash Additional Firmware</translation>
</message>
@@ -17636,22 +17621,22 @@
<translation>Instalar 'esptool.py'</translation>
</message>
<message>
- <location filename="../MicroPython/EspDevices.py" line="164"/>
+ <location filename="../MicroPython/EspDevices.py" line="173"/>
<source>Shall the flash of the selected device really be erased?</source>
<translation>¿Borrar el flash del dispositivo seleccionado?</translation>
</message>
<message>
- <location filename="../MicroPython/EspDevices.py" line="176"/>
+ <location filename="../MicroPython/EspDevices.py" line="185"/>
<source>'esptool erase_flash' Output</source>
<translation>Salida de 'esptool erase_flash'</translation>
</message>
<message>
- <location filename="../MicroPython/EspDevices.py" line="199"/>
+ <location filename="../MicroPython/EspDevices.py" line="208"/>
<source>Unsupported chip type '{0}'.</source>
<translation>Tipo de chip no soportado '{0}'.</translation>
</message>
<message>
- <location filename="../MicroPython/EspDevices.py" line="308"/>
+ <location filename="../MicroPython/EspDevices.py" line="317"/>
<source>'esptool write_flash' Output</source>
<translation>Salida de 'esptool write_flash'</translation>
</message>
@@ -17661,47 +17646,47 @@
<translation>Resetear Dispositivo</translation>
</message>
<message>
- <location filename="../MicroPython/EspDevices.py" line="274"/>
+ <location filename="../MicroPython/EspDevices.py" line="283"/>
<source>Backup Firmware</source>
<translation>Copia de Seguridad de Firmware</translation>
</message>
<message>
- <location filename="../MicroPython/EspDevices.py" line="308"/>
+ <location filename="../MicroPython/EspDevices.py" line="317"/>
<source>Restore Firmware</source>
<translation>Restaurar Firmware</translation>
</message>
<message>
- <location filename="../MicroPython/EspDevices.py" line="326"/>
+ <location filename="../MicroPython/EspDevices.py" line="335"/>
<source>Show Chip ID</source>
<translation>Mostrar ID de Chip</translation>
</message>
<message>
- <location filename="../MicroPython/EspDevices.py" line="343"/>
+ <location filename="../MicroPython/EspDevices.py" line="352"/>
<source>Show Flash ID</source>
<translation>Mostrar ID de Flash</translation>
</message>
<message>
- <location filename="../MicroPython/EspDevices.py" line="360"/>
+ <location filename="../MicroPython/EspDevices.py" line="369"/>
<source>Show MAC Address</source>
<translation>Mostrar dirección MAC</translation>
</message>
<message>
- <location filename="../MicroPython/EspDevices.py" line="274"/>
+ <location filename="../MicroPython/EspDevices.py" line="283"/>
<source>'esptool read_flash' Output</source>
<translation>Salida de 'esptool read_flash'</translation>
</message>
<message>
- <location filename="../MicroPython/EspDevices.py" line="326"/>
+ <location filename="../MicroPython/EspDevices.py" line="335"/>
<source>'esptool chip_id' Output</source>
<translation>Salida de 'esptool chip_id'</translation>
</message>
<message>
- <location filename="../MicroPython/EspDevices.py" line="343"/>
+ <location filename="../MicroPython/EspDevices.py" line="352"/>
<source>'esptool flash_id' Output</source>
<translation>Salida de 'esptool flash_id'</translation>
</message>
<message>
- <location filename="../MicroPython/EspDevices.py" line="360"/>
+ <location filename="../MicroPython/EspDevices.py" line="369"/>
<source>'esptool read_mac' Output</source>
<translation>Salida de 'esptool read_mac'</translation>
</message>
@@ -44048,37 +44033,37 @@
<context>
<name>MicroPythonDevice</name>
<message>
- <location filename="../MicroPython/MicroPythonDevices.py" line="337"/>
+ <location filename="../MicroPython/MicroPythonDevices.py" line="342"/>
<source>Unsupported Device</source>
<translation>Dispositivo no soportado</translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonDevices.py" line="347"/>
+ <location filename="../MicroPython/MicroPythonDevices.py" line="352"/>
<source>REPL is not supported by this device.</source>
<translation>REPL no soportado por este dispositivo.</translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonDevices.py" line="366"/>
+ <location filename="../MicroPython/MicroPythonDevices.py" line="371"/>
<source>Plotter is not supported by this device.</source>
<translation>Plotter no soportado por este dispositivo.</translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonDevices.py" line="385"/>
+ <location filename="../MicroPython/MicroPythonDevices.py" line="390"/>
<source>Running scripts is not supported by this device.</source>
<translation>La ejecución de scripts no está soportada por este dispositivo.</translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonDevices.py" line="405"/>
+ <location filename="../MicroPython/MicroPythonDevices.py" line="410"/>
<source>File Manager is not supported by this device.</source>
<translation>El Gestor de Archovos no está soportado por este dispositivo.</translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonDevices.py" line="448"/>
+ <location filename="../MicroPython/MicroPythonDevices.py" line="453"/>
<source>Select Device Directory</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonDevices.py" line="448"/>
+ <location filename="../MicroPython/MicroPythonDevices.py" line="453"/>
<source>Select the directory for the connected device:</source>
<translation type="unfinished"></translation>
</message>
@@ -44465,7 +44450,7 @@
<translation>Todos los archivos (*)</translation>
</message>
<message>
- <location filename="../Preferences/ConfigurationPages/MicroPythonPage.ui" line="420"/>
+ <location filename="../Preferences/ConfigurationPages/MicroPythonPage.ui" line="443"/>
<source>MicroPython:</source>
<translation>MicroPython:</translation>
</message>
@@ -44480,7 +44465,7 @@
<translation>Introducir la URL para la documentación de CircuitPython</translation>
</message>
<message>
- <location filename="../Preferences/ConfigurationPages/MicroPythonPage.ui" line="390"/>
+ <location filename="../Preferences/ConfigurationPages/MicroPythonPage.ui" line="413"/>
<source>Enter the URL for the BBC micro:bit MicroPython documentation</source>
<translation>Intrroducir la URL para la documentación BBC micro:bit MicroPython</translation>
</message>
@@ -44570,32 +44555,32 @@
<translation>Qt</translation>
</message>
<message>
- <location filename="../Preferences/ConfigurationPages/MicroPythonPage.ui" line="400"/>
+ <location filename="../Preferences/ConfigurationPages/MicroPythonPage.ui" line="423"/>
<source>Calliope mini:</source>
<translation>Calliope mini:</translation>
</message>
<message>
- <location filename="../Preferences/ConfigurationPages/MicroPythonPage.ui" line="413"/>
+ <location filename="../Preferences/ConfigurationPages/MicroPythonPage.ui" line="436"/>
<source>Enter the URL for the Callope mini Firmware</source>
<translation>Introducir la ruta del archivo de mini-Firmware Calliope</translation>
</message>
<message>
- <location filename="../Preferences/ConfigurationPages/MicroPythonPage.ui" line="441"/>
+ <location filename="../Preferences/ConfigurationPages/MicroPythonPage.ui" line="464"/>
<source>Enter the URL for the Calliope mini MicroPython documentation</source>
<translation>Introducir la URL para la documentación de mini-MicroPython Calliope</translation>
</message>
<message>
- <location filename="../Preferences/ConfigurationPages/MicroPythonPage.ui" line="258"/>
+ <location filename="../Preferences/ConfigurationPages/MicroPythonPage.ui" line="369"/>
<source>MicroPython</source>
<translation>MicroPython</translation>
</message>
<message>
- <location filename="../Preferences/ConfigurationPages/MicroPythonPage.ui" line="406"/>
+ <location filename="../Preferences/ConfigurationPages/MicroPythonPage.ui" line="429"/>
<source>Firmware:</source>
<translation>Firmware:</translation>
</message>
<message>
- <location filename="../Preferences/ConfigurationPages/MicroPythonPage.ui" line="434"/>
+ <location filename="../Preferences/ConfigurationPages/MicroPythonPage.ui" line="457"/>
<source>Documentation:</source>
<translation>Documentación:</translation>
</message>
@@ -44617,7 +44602,7 @@
<message>
<location filename="../Preferences/ConfigurationPages/MicroPythonPage.ui" line="376"/>
<source>Enter the URL for the BBC micro:bit MicroPython Firmware</source>
- <translation>Introducir la ruta del archivo de firmware BBC micro:bit MicroPython</translation>
+ <translation type="obsolete">Introducir la ruta del archivo de firmware BBC micro:bit MicroPython</translation>
</message>
<message>
<location filename="../Preferences/ConfigurationPages/MicroPythonPage.ui" line="37"/>
@@ -44640,10 +44625,30 @@
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="../Preferences/ConfigurationPages/MicroPythonPage.ui" line="427"/>
+ <location filename="../Preferences/ConfigurationPages/MicroPythonPage.ui" line="450"/>
<source>Enter the URL for the Calliope mini MicroPython Firmware</source>
<translation type="unfinished"></translation>
</message>
+ <message>
+ <location filename="../Preferences/ConfigurationPages/MicroPythonPage.ui" line="375"/>
+ <source>micro:bit V1:</source>
+ <translation type="unfinished"></translation>
+ </message>
+ <message>
+ <location filename="../Preferences/ConfigurationPages/MicroPythonPage.ui" line="382"/>
+ <source>Enter the URL for the BBC micro:bit V1 MicroPython Firmware</source>
+ <translation type="unfinished"></translation>
+ </message>
+ <message>
+ <location filename="../Preferences/ConfigurationPages/MicroPythonPage.ui" line="389"/>
+ <source>micro:bit V2:</source>
+ <translation type="unfinished"></translation>
+ </message>
+ <message>
+ <location filename="../Preferences/ConfigurationPages/MicroPythonPage.ui" line="396"/>
+ <source>Enter the URL for the BBC micro:bit V2 MicroPython Firmware</source>
+ <translation type="unfinished"></translation>
+ </message>
</context>
<context>
<name>MicroPythonProgressInfoDialog</name>
@@ -44686,17 +44691,17 @@
<translation>Pulsar para abrir una ventana de gráfica para mostrar datos recibidos desde el dispositivo seleccionado</translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonWidget.py" line="529"/>
+ <location filename="../MicroPython/MicroPythonWidget.py" line="531"/>
<source>Press to connect the selected device</source>
<translation>Pulsar para conectar el dispositivo seleccionado</translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonWidget.py" line="271"/>
+ <location filename="../MicroPython/MicroPythonWidget.py" line="270"/>
<source><h3>The QtSerialPort package is not available.<br/>MicroPython support is deactivated.</h3></source>
<translation><h3>El package QtSerialPort no está disponible.<br/>Soporte para MicroPython desactivado.</h3></translation>
</message>
<message numerus="yes">
- <location filename="../MicroPython/MicroPythonWidget.py" line="308"/>
+ <location filename="../MicroPython/MicroPythonWidget.py" line="307"/>
<source>%n supported device(s) detected.</source>
<translation>
<numerusform>%n dispositivo soportado detectado.</numerusform>
@@ -44709,37 +44714,37 @@
<translation type="obsolete">{0} en {1}</translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonWidget.py" line="330"/>
+ <location filename="../MicroPython/MicroPythonWidget.py" line="329"/>
<source>No supported devices detected.</source>
<translation>No se han detectado dispositivos soportados.</translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonWidget.py" line="499"/>
- <source>Clear</source>
- <translation>Limpiar</translation>
- </message>
- <message>
<location filename="../MicroPython/MicroPythonWidget.py" line="501"/>
+ <source>Clear</source>
+ <translation>Limpiar</translation>
+ </message>
+ <message>
+ <location filename="../MicroPython/MicroPythonWidget.py" line="503"/>
<source>Copy</source>
<translation>Copiar</translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonWidget.py" line="502"/>
+ <location filename="../MicroPython/MicroPythonWidget.py" line="504"/>
<source>Paste</source>
<translation>Pegar</translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonWidget.py" line="524"/>
+ <location filename="../MicroPython/MicroPythonWidget.py" line="526"/>
<source>Press to disconnect the current device</source>
<translation>Pulsar para desconectar el dispositivo seleccionado</translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonWidget.py" line="545"/>
+ <location filename="../MicroPython/MicroPythonWidget.py" line="547"/>
<source>No device attached</source>
<translation>No hay dispositivo conectado</translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonWidget.py" line="545"/>
+ <location filename="../MicroPython/MicroPythonWidget.py" line="547"/>
<source>Please ensure the device is plugged into your computer and selected.
It must have a version of MicroPython (or CircuitPython) flashed onto it before anything will work.
@@ -44752,217 +44757,217 @@
Finalmente, pulsar el botón de reset del dispositivo y esperar unos pocos segundos antes de intentar de nuevo.</translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonWidget.py" line="572"/>
+ <location filename="../MicroPython/MicroPythonWidget.py" line="574"/>
<source>Start REPL</source>
<translation>Iniciar REPL</translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonWidget.py" line="572"/>
+ <location filename="../MicroPython/MicroPythonWidget.py" line="574"/>
<source><p>The REPL cannot be started.</p><p>Reason: {0}</p></source>
<translation><p>El REPL no se puede iniciar.</p><p>Razón: {0}</p></translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonWidget.py" line="974"/>
+ <location filename="../MicroPython/MicroPythonWidget.py" line="976"/>
<source>Serial Device Connect</source>
<translation>Conexión de Dispositivo en Serie</translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonWidget.py" line="974"/>
+ <location filename="../MicroPython/MicroPythonWidget.py" line="976"/>
<source><p>Cannot connect to device at serial port <b>{0}</b>.</p></source>
<translation><p>No se puede conectar el dispositovo en el puerto de serie <b>{0}</b>.</p></translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonWidget.py" line="1019"/>
+ <location filename="../MicroPython/MicroPythonWidget.py" line="1021"/>
<source>Run Script</source>
<translation>Ejecutar Script</translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonWidget.py" line="1002"/>
+ <location filename="../MicroPython/MicroPythonWidget.py" line="1004"/>
<source>There is no editor open. Abort...</source>
<translation>No hay editor abierto. Abortando...</translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonWidget.py" line="1010"/>
+ <location filename="../MicroPython/MicroPythonWidget.py" line="1012"/>
<source>The current editor does not contain a script. Abort...</source>
<translation>El editor actual no contiene un script. Abortando...</translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonWidget.py" line="1019"/>
+ <location filename="../MicroPython/MicroPythonWidget.py" line="1021"/>
<source><p>Cannot run script.</p><p>Reason: {0}</p></source>
<translation><p>No se puede ejecutar el script.</p><p>Razón: {0}</p></translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonWidget.py" line="1043"/>
+ <location filename="../MicroPython/MicroPythonWidget.py" line="1045"/>
<source>Open Python File</source>
<translation>Abrir Archivo de Python</translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonWidget.py" line="1043"/>
+ <location filename="../MicroPython/MicroPythonWidget.py" line="1045"/>
<source>Python3 Files (*.py);;All Files (*)</source>
<translation>Archivos de Python3 (*.py);;Todos los Archivos (*)</translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonWidget.py" line="1088"/>
+ <location filename="../MicroPython/MicroPythonWidget.py" line="1090"/>
<source>Start Chart</source>
<translation>Iniciar Gráfica</translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonWidget.py" line="1088"/>
+ <location filename="../MicroPython/MicroPythonWidget.py" line="1090"/>
<source><p>The Chart cannot be started.</p><p>Reason: {0}</p></source>
<translation><p>No se puede iniciar la gráfica.</p><p>Razón: {0}</p></translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonWidget.py" line="1117"/>
+ <location filename="../MicroPython/MicroPythonWidget.py" line="1119"/>
<source>Unsaved Chart Data</source>
<translation>Datos de Gráfica sin Guardar</translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonWidget.py" line="1117"/>
+ <location filename="../MicroPython/MicroPythonWidget.py" line="1119"/>
<source>The chart contains unsaved data.</source>
<translation>La gráfica contiene datos sin guardar.</translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonWidget.py" line="1168"/>
+ <location filename="../MicroPython/MicroPythonWidget.py" line="1170"/>
<source>Start File Manager</source>
<translation>Comenzar Gestor de Archivos</translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonWidget.py" line="1168"/>
+ <location filename="../MicroPython/MicroPythonWidget.py" line="1170"/>
<source><p>The File Manager cannot be started.</p><p>Reason: {0}</p></source>
<translation><p>El Gestor de Archivos no se puede iniciar.</p><p>Razón: {0}</p></translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonWidget.py" line="1239"/>
+ <location filename="../MicroPython/MicroPythonWidget.py" line="1241"/>
<source>Show Version</source>
<translation>Mostrar Versión</translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonWidget.py" line="1242"/>
+ <location filename="../MicroPython/MicroPythonWidget.py" line="1244"/>
<source>Show Implementation</source>
<translation>Mostrar Implementación</translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonWidget.py" line="1364"/>
+ <location filename="../MicroPython/MicroPythonWidget.py" line="1370"/>
<source>Synchronize Time</source>
<translation>Sincronizar Hora</translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonWidget.py" line="1250"/>
+ <location filename="../MicroPython/MicroPythonWidget.py" line="1252"/>
<source>Show Device Time</source>
<translation>Mostrar Hora del Dispositivo</translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonWidget.py" line="1253"/>
+ <location filename="../MicroPython/MicroPythonWidget.py" line="1255"/>
<source>Show Local Time</source>
<translation>Mostrar Hora Local</translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonWidget.py" line="1582"/>
+ <location filename="../MicroPython/MicroPythonWidget.py" line="1588"/>
<source>Compile Python File</source>
<translation>Compilar Archivo de Python</translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonWidget.py" line="1602"/>
+ <location filename="../MicroPython/MicroPythonWidget.py" line="1608"/>
<source>Compile Current Editor</source>
<translation>Compilar Editor Actual</translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonWidget.py" line="1301"/>
+ <location filename="../MicroPython/MicroPythonWidget.py" line="1307"/>
<source><h3>Device Version Information</h3></source>
<translation><h3>Información de Versión de Dispositivo</h3></translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonWidget.py" line="1310"/>
+ <location filename="../MicroPython/MicroPythonWidget.py" line="1316"/>
<source>No version information available.</source>
<translation>No hay información de versión disponible.</translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonWidget.py" line="1312"/>
+ <location filename="../MicroPython/MicroPythonWidget.py" line="1318"/>
<source>Device Version Information</source>
<translation>Información de Versión de Dispositivo</translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonWidget.py" line="1335"/>
+ <location filename="../MicroPython/MicroPythonWidget.py" line="1341"/>
<source>unknown</source>
<translation>desconocido</translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonWidget.py" line="1339"/>
+ <location filename="../MicroPython/MicroPythonWidget.py" line="1345"/>
<source>Device Implementation Information</source>
<translation>Información de Implementación de Dispositivo</translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonWidget.py" line="1339"/>
+ <location filename="../MicroPython/MicroPythonWidget.py" line="1345"/>
<source><h3>Device Implementation Information</h3><p>This device contains <b>{0} {1}</b>.</p></source>
<translation><h3>Información de Implementación de Dispositivo </h3><p>Este dispositivo contiene <b>{0} {1}</b>.</p></translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonWidget.py" line="1364"/>
+ <location filename="../MicroPython/MicroPythonWidget.py" line="1370"/>
<source><p>The time of the connected device was synchronized with the local time.</p></source>
<translation><p>La hora del dispositivo conectado está sincronizada con la hora local.</p></translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonWidget.py" line="1386"/>
+ <location filename="../MicroPython/MicroPythonWidget.py" line="1392"/>
<source><h3>Device Date and Time</h3><table><tr><td><b>Date</b></td><td>{0}</td></tr><tr><td><b>Time</b></td><td>{1}</td></tr></table></source>
<translation><h3>Fecha y Hora del Dispositivo</h3><table><tr><td><b>Fecha</b></td><td>{0}</td></tr><tr><td><b>Hora</b></td><td>{1}</td></tr></table></translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonWidget.py" line="1394"/>
+ <location filename="../MicroPython/MicroPythonWidget.py" line="1400"/>
<source><h3>Device Date and Time</h3><p>{0}</p></source>
<translation><h3>Fecha y Hora del Dispositivo</h3><p>{0}</p></translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonWidget.py" line="1409"/>
+ <location filename="../MicroPython/MicroPythonWidget.py" line="1415"/>
<source>Device Date and Time</source>
<translation>Fecha y Hora del Dispositivo</translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonWidget.py" line="1422"/>
+ <location filename="../MicroPython/MicroPythonWidget.py" line="1428"/>
<source>Local Date and Time</source>
<translation>Fecha y Hora Local</translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonWidget.py" line="1422"/>
+ <location filename="../MicroPython/MicroPythonWidget.py" line="1428"/>
<source><h3>Local Date and Time</h3><table><tr><td><b>Date</b></td><td>{0}</td></tr><tr><td><b>Time</b></td><td>{1}</td></tr></table></source>
<translation><h3>Fecha y Hora del Local</h3><table><tr><td><b>Fecha</b></td><td>{0}</td></tr><tr><td><b>Hora</b></td><td>{1}</td></tr></table></translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonWidget.py" line="1490"/>
+ <location filename="../MicroPython/MicroPythonWidget.py" line="1496"/>
<source>Error handling device</source>
<translation>Error de gestión del dispositivo</translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonWidget.py" line="1490"/>
+ <location filename="../MicroPython/MicroPythonWidget.py" line="1496"/>
<source><p>There was an error communicating with the connected device.</p><p>Method: {0}</p><p>Message: {1}</p></source>
<translation><p>Ha ocurrido un error al comunicar con el dispositivo conectado.</p><p>Método: {0}</p><p>Mensaje: {1}</p></translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonWidget.py" line="1530"/>
+ <location filename="../MicroPython/MicroPythonWidget.py" line="1536"/>
<source>The MicroPython cross compiler <b>mpy-cross</b> cannot be found. Ensure it is in the search path or configure it on the MicroPython configuration page.</source>
<translation>El compilador multiplataforma de MicroPython <b>mpy-cross</b> no se encuentra. Asegúrese de que está en la ruta de búsqueda o configurarlo en la página de configuración de MicroPython.</translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonWidget.py" line="1552"/>
+ <location filename="../MicroPython/MicroPythonWidget.py" line="1558"/>
<source>Python Files (*.py);;All Files (*)</source>
<translation>Archivos Python (*.py);;Todos los Archivos (*)</translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonWidget.py" line="1562"/>
+ <location filename="../MicroPython/MicroPythonWidget.py" line="1568"/>
<source>The Python file <b>{0}</b> does not exist. Aborting...</source>
<translation>El archivo de Python <b>{0}</b> no existe. Abortando...</translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonWidget.py" line="1572"/>
+ <location filename="../MicroPython/MicroPythonWidget.py" line="1578"/>
<source>'mpy-cross' Output</source>
<translation>Salida de 'mpy-cross'</translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonWidget.py" line="1595"/>
+ <location filename="../MicroPython/MicroPythonWidget.py" line="1601"/>
<source>The current editor does not contain a Python file. Aborting...</source>
<translation>El editor actual no contiene un archivo de Python. Abortando...</translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonWidget.py" line="219"/>
+ <location filename="../MicroPython/MicroPythonWidget.py" line="218"/>
<source>MicroPython Menu</source>
<translation>Menú de MicroPython</translation>
</message>
@@ -44972,52 +44977,52 @@
<translation>Pulsar para abrir un gestor de archivos en el dispositivo seleccionado</translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonWidget.py" line="1101"/>
+ <location filename="../MicroPython/MicroPythonWidget.py" line="1103"/>
<source>µPy Chart</source>
<translation>Gráfica µPy</translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonWidget.py" line="1184"/>
+ <location filename="../MicroPython/MicroPythonWidget.py" line="1186"/>
<source>µPy Files</source>
<translation>Archivos µPy</translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonWidget.py" line="1282"/>
+ <location filename="../MicroPython/MicroPythonWidget.py" line="1284"/>
<source>Show Documentation</source>
<translation>Mostrar Documentación</translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonWidget.py" line="1291"/>
+ <location filename="../MicroPython/MicroPythonWidget.py" line="1297"/>
<source>Configure</source>
<translation>Configurar</translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonWidget.py" line="1256"/>
+ <location filename="../MicroPython/MicroPythonWidget.py" line="1258"/>
<source>Show Time</source>
<translation>Mostrar Tiempo</translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonWidget.py" line="1275"/>
+ <location filename="../MicroPython/MicroPythonWidget.py" line="1277"/>
<source>Download Firmware</source>
<translation>Descargar Firmware</translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonWidget.py" line="1465"/>
+ <location filename="../MicroPython/MicroPythonWidget.py" line="1471"/>
<source>Date and Time</source>
<translation>Fecha y Hora</translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonWidget.py" line="1448"/>
+ <location filename="../MicroPython/MicroPythonWidget.py" line="1454"/>
<source><table><tr><th></th><th>Local Date and Time</th><th>Device Date and Time</th></tr><tr><td><b>Date</b></td><td align='center'>{0}</td><td align='center'>{2}</td></tr><tr><td><b>Time</b></td><td align='center'>{1}</td><td align='center'>{3}</td></tr></table></source>
<translation><table><tr><th></th><th>Fecha y Hora Local</th><th>Fecha y Hora del Dispositivo</th></tr><tr><td><b>Fecha</b></td><td align='center'>{0}</td><td align='center'>{2}</td></tr><tr><td><b>Hora</b></td><td align='center'>{1}</td><td align='center'>{3}</td></tr></table></translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonWidget.py" line="1465"/>
+ <location filename="../MicroPython/MicroPythonWidget.py" line="1471"/>
<source><table><tr><th>Local Date and Time</th><th>Device Date and Time</th></tr><tr><td align='center'>{0} {1}</td><td align='center'>{2}</td></tr></table></source>
<translation><table><tr><th>Fecha y Hora Local</th><th>Fecha y Hora del Dispositivo</th></tr><tr><td align='center'>{0} {1}</td><td align='center'>{2}</td></tr></table></translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonWidget.py" line="380"/>
+ <location filename="../MicroPython/MicroPythonWidget.py" line="382"/>
<source>Unknown MicroPython Device</source>
<translation>Dispositivo MicroPython Desconocido</translation>
</message>
@@ -45032,52 +45037,57 @@
<translation type="obsolete">{0} ({1:04x}/{2:04x})</translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonWidget.py" line="1288"/>
+ <location filename="../MicroPython/MicroPythonWidget.py" line="1294"/>
<source>Ignored Serial Devices</source>
<translation>Dispositivos de Serie Ignorados</translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonWidget.py" line="1224"/>
+ <location filename="../MicroPython/MicroPythonWidget.py" line="1226"/>
<source>Downloads</source>
<translation type="unfinished">Descargas</translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonWidget.py" line="313"/>
+ <location filename="../MicroPython/MicroPythonWidget.py" line="312"/>
<source>{0} - {1} ({2})</source>
<comment>board name, description, port name</comment>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonWidget.py" line="352"/>
+ <location filename="../MicroPython/MicroPythonWidget.py" line="354"/>
<source><p>Detected these unknown serial devices</p><ul><li>{0}</li></ul><p>Please report them together with the board name and a short description to <a href="mailto:{1}"> the eric bug reporting address</a> if it is a MicroPython board.</p></source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonWidget.py" line="352"/>
+ <location filename="../MicroPython/MicroPythonWidget.py" line="354"/>
<source>{0} (0x{1:04x}/0x{2:04x})</source>
<comment>description, VId, PId</comment>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonWidget.py" line="380"/>
+ <location filename="../MicroPython/MicroPythonWidget.py" line="382"/>
<source>Would you like to add them to the list of manually configured devices?</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonWidget.py" line="1286"/>
+ <location filename="../MicroPython/MicroPythonWidget.py" line="1292"/>
<source>Manage Unknown Devices</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonWidget.py" line="1687"/>
+ <location filename="../MicroPython/MicroPythonWidget.py" line="1693"/>
<source>Add Unknown Devices</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="../MicroPython/MicroPythonWidget.py" line="1687"/>
+ <location filename="../MicroPython/MicroPythonWidget.py" line="1693"/>
<source>Select the devices to be added:</source>
<translation type="unfinished"></translation>
</message>
+ <message>
+ <location filename="../MicroPython/MicroPythonWidget.py" line="1289"/>
+ <source>Flash UF2 Device</source>
+ <translation type="unfinished"></translation>
+ </message>
</context>
<context>
<name>MicrobitDevice</name>
@@ -45102,32 +45112,32 @@
<translation>Guardar el script actual como 'main.py' en el dispositivo conectado</translation>
</message>
<message>
- <location filename="../MicroPython/MicrobitDevices.py" line="317"/>
+ <location filename="../MicroPython/MicrobitDevices.py" line="326"/>
<source>The script is empty. Aborting.</source>
<translation>Script vacío. Abortando.</translation>
</message>
<message>
- <location filename="../MicroPython/MicrobitDevices.py" line="307"/>
+ <location filename="../MicroPython/MicrobitDevices.py" line="316"/>
<source>The current editor does not contain a Python script. Write it anyway?</source>
<translation>El editor actual no contiene un script Python. ¿Escribir de todos modos?</translation>
</message>
<message>
- <location filename="../MicroPython/MicrobitDevices.py" line="345"/>
+ <location filename="../MicroPython/MicrobitDevices.py" line="354"/>
<source><p>The script could not be saved to the device.</p><p>Reason: {0}</p></source>
<translation><p>El script no se ha podido guardar al dispositivo.</p><p>Razón: {0}</p></translation>
</message>
<message>
- <location filename="../MicroPython/MicrobitDevices.py" line="304"/>
+ <location filename="../MicroPython/MicrobitDevices.py" line="313"/>
<source>Save Script</source>
<translation>Guardar Script</translation>
</message>
<message>
+ <location filename="../MicroPython/MicrobitDevices.py" line="343"/>
+ <source>Save Script as '{0}'</source>
+ <translation>Guardar Script como '{0}'</translation>
+ </message>
+ <message>
<location filename="../MicroPython/MicrobitDevices.py" line="334"/>
- <source>Save Script as '{0}'</source>
- <translation>Guardar Script como '{0}'</translation>
- </message>
- <message>
- <location filename="../MicroPython/MicrobitDevices.py" line="325"/>
<source>Enter a file name on the device:</source>
<translation>Introducir un nombre de archivo para el dispositivo:</translation>
</message>
@@ -45166,17 +45176,17 @@
<translation>Flash Firmware</translation>
</message>
<message>
- <location filename="../MicroPython/MicrobitDevices.py" line="273"/>
+ <location filename="../MicroPython/MicrobitDevices.py" line="282"/>
<source>Flash MicroPython/Firmware</source>
<translation>Flash MicroPython/Firmware</translation>
</message>
<message>
- <location filename="../MicroPython/MicrobitDevices.py" line="201"/>
+ <location filename="../MicroPython/MicrobitDevices.py" line="210"/>
<source><p>The BBC micro:bit is not ready for flashing the DAPLink firmware. Follow these instructions. </p><ul><li>unplug USB cable and any batteries</li><li>keep RESET button pressed an plug USB cable back in</li><li>a drive called MAINTENANCE should be available</li></ul><p>See the <a href="https://microbit.org/guide/firmware/">micro:bit web site</a> for details.</p></source>
<translation><p>El micro:bit BBC no está listo para flashing. Seguir estas instrucciones.</p><ul><li>desconectar cable USB y batería</li><li>mantener el botón RESET apretado y conectar el cable USB de nuevo</li><li>debería haber disponible un volumen llamado MANTENIMIENTO</li></ul><p>Ver el website de <a href="https://microbit.org/guide/firmware/">micro:bit</a> para más detalles.</p></translation>
</message>
<message>
- <location filename="../MicroPython/MicrobitDevices.py" line="221"/>
+ <location filename="../MicroPython/MicrobitDevices.py" line="230"/>
<source><p>The BBC micro:bit is not ready for flashing the MicroPython firmware. Please make sure, that a drive called MICROBIT is available.</p></source>
<translation><p>El micro:bit BBC no está listo para flashing del firmware de MycroPython. Por favor asegurar la disponibilidad de un dispositivo llamado MICROBIT.</p></translation>
</message>
@@ -45206,33 +45216,43 @@
<translation type="obsolete">Seleccionar el tipo de firmware a descargar de la lista de debajo:</translation>
</message>
<message>
- <location filename="../MicroPython/MicrobitDevices.py" line="234"/>
+ <location filename="../MicroPython/MicrobitDevices.py" line="243"/>
<source><p>The "Calliope mini" is not ready for flashing the DAPLink firmware. Follow these instructions. </p><ul><li>unplug USB cable and any batteries</li><li>keep RESET button pressed an plug USB cable back in</li><li>a drive called MAINTENANCE should be available</li></ul></source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="../MicroPython/MicrobitDevices.py" line="251"/>
+ <location filename="../MicroPython/MicrobitDevices.py" line="260"/>
<source><p>The "Calliope mini" is not ready for flashing the MicroPython firmware. Please make sure, that a drive called MINI is available.</p></source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="../MicroPython/MicrobitDevices.py" line="264"/>
+ <location filename="../MicroPython/MicrobitDevices.py" line="273"/>
<source>MicroPython/Firmware Files (*.hex *.bin);;All Files (*)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="../MicroPython/MicrobitDevices.py" line="404"/>
+ <location filename="../MicroPython/MicrobitDevices.py" line="415"/>
<source>MicroPython Firmware</source>
<translation type="unfinished"></translation>
</message>
<message>
+ <location filename="../MicroPython/MicrobitDevices.py" line="417"/>
+ <source>DAPLink Firmware</source>
+ <translation type="unfinished"></translation>
+ </message>
+ <message>
+ <location filename="../MicroPython/MicrobitDevices.py" line="282"/>
+ <source>There are multiple devices ready for flashing. Please make sure, that only one device is prepared.</source>
+ <translation type="unfinished"></translation>
+ </message>
+ <message>
<location filename="../MicroPython/MicrobitDevices.py" line="406"/>
- <source>DAPLink Firmware</source>
- <translation type="unfinished"></translation>
- </message>
- <message>
- <location filename="../MicroPython/MicrobitDevices.py" line="273"/>
- <source>There are multiple devices ready for flashing. Please make sure, that only one device is prepared.</source>
+ <source>MicroPython Firmware for BBC micro:bit V1</source>
+ <translation type="unfinished"></translation>
+ </message>
+ <message>
+ <location filename="../MicroPython/MicrobitDevices.py" line="408"/>
+ <source>MicroPython Firmware for BBC micro:bit V2</source>
<translation type="unfinished"></translation>
</message>
</context>
@@ -50637,17 +50657,17 @@
<context>
<name>Preferences</name>
<message>
- <location filename="../Preferences/__init__.py" line="1636"/>
+ <location filename="../Preferences/__init__.py" line="1639"/>
<source>Export Preferences</source>
<translation>Exportar Preferencias</translation>
</message>
<message>
- <location filename="../Preferences/__init__.py" line="1664"/>
+ <location filename="../Preferences/__init__.py" line="1667"/>
<source>Import Preferences</source>
<translation>Importar Preferencias</translation>
</message>
<message>
- <location filename="../Preferences/__init__.py" line="1664"/>
+ <location filename="../Preferences/__init__.py" line="1667"/>
<source>Properties File (*.ini);;All Files (*)</source>
<translation>Archivo de Propiedades (*.ini);;Todos los archivos (*)</translation>
</message>
@@ -54804,7 +54824,7 @@
<translation>Listar Dispositivos con capacidad DFU</translation>
</message>
<message>
- <location filename="../MicroPython/PyBoardDevices.py" line="382"/>
+ <location filename="../MicroPython/PyBoardDevices.py" line="391"/>
<source>Flash MicroPython Firmware</source>
<translation>Flash MicroPython Firmware</translation>
</message>
@@ -54814,57 +54834,57 @@
<translation>Instrucciones para MicroPython Flash</translation>
</message>
<message>
- <location filename="../MicroPython/PyBoardDevices.py" line="265"/>
+ <location filename="../MicroPython/PyBoardDevices.py" line="274"/>
<source>dfu-util not available</source>
<translation>dfu-util no está disponible</translation>
</message>
<message>
- <location filename="../MicroPython/PyBoardDevices.py" line="265"/>
+ <location filename="../MicroPython/PyBoardDevices.py" line="274"/>
<source>The dfu-util firmware flashing tool <b>dfu-util</b> cannot be found or is not executable. Ensure it is in the search path or configure it on the MicroPython configuration page.</source>
<translation>La herramienta de firmware de flasheo dfu-util <b>dfu-util</b> no se encuentra o no es ejecutable. Asegure que está en la ruta de búsqueda o configure su valor en la página de configuración de MicroPython.</translation>
</message>
<message>
- <location filename="../MicroPython/PyBoardDevices.py" line="286"/>
+ <location filename="../MicroPython/PyBoardDevices.py" line="295"/>
<source><h3>Enable DFU Mode</h3><p>1. Disconnect everything from your board</p><p>2. Disconnect your board</p><p>3. Connect the DFU/BOOT0 pin with a 3.3V pin</p><p>4. Re-connect your board</p><hr /></source>
<translation><h3>Habilitar Modo DFU</h3><p>1. Desconectar todo de la placa</p><p>2. Desconectar la placa</p><p>3. Conectar el pin DFU/BOOT0 con un pin de 3.3V pin</p><p>4. Reconectar la placa</p><hr /></translation>
</message>
<message>
- <location filename="../MicroPython/PyBoardDevices.py" line="296"/>
- <source><p><b>Warning:</b> Make sure that all other DFU capable devices except your PyBoard are disconnected.<hr /></source>
- <translation><p><b>Aviso:</b> Asegurar que todos los demás dispositivos con capacidad DFU -a excepción del PyBoard- están desconectados.<hr /></translation>
- </message>
- <message>
- <location filename="../MicroPython/PyBoardDevices.py" line="302"/>
- <source><p>Press <b>OK</b> to continue...</p></source>
- <translation><p>Pulsar <b>OK</b> para continuar...</p></translation>
- </message>
- <message>
<location filename="../MicroPython/PyBoardDevices.py" line="305"/>
+ <source><p><b>Warning:</b> Make sure that all other DFU capable devices except your PyBoard are disconnected.<hr /></source>
+ <translation><p><b>Aviso:</b> Asegurar que todos los demás dispositivos con capacidad DFU -a excepción del PyBoard- están desconectados.<hr /></translation>
+ </message>
+ <message>
+ <location filename="../MicroPython/PyBoardDevices.py" line="311"/>
+ <source><p>Press <b>OK</b> to continue...</p></source>
+ <translation><p>Pulsar <b>OK</b> para continuar...</p></translation>
+ </message>
+ <message>
+ <location filename="../MicroPython/PyBoardDevices.py" line="314"/>
<source>Enable DFU mode</source>
<translation>Habilitar modo DFU</translation>
</message>
<message>
- <location filename="../MicroPython/PyBoardDevices.py" line="319"/>
+ <location filename="../MicroPython/PyBoardDevices.py" line="328"/>
<source><h3>Disable DFU Mode</h3><p>1. Disconnect your board</p><p>2. Remove the DFU jumper</p><p>3. Re-connect your board</p><hr /><p>Press <b>OK</b> to continue...</p></source>
<translation><h3>Desabilitar Modo DFU</h3><p>1. Desconectar la placa</p><p>2. Sacar el jumper DFU</p><p>3. Reconectar la placa</p><hr /><p>Pulsar <b>OK</b> para continuar...</p></translation>
</message>
<message>
- <location filename="../MicroPython/PyBoardDevices.py" line="327"/>
+ <location filename="../MicroPython/PyBoardDevices.py" line="336"/>
<source>Disable DFU mode</source>
<translation>Deshabilitar modo DFU</translation>
</message>
<message>
- <location filename="../MicroPython/PyBoardDevices.py" line="382"/>
+ <location filename="../MicroPython/PyBoardDevices.py" line="391"/>
<source>'dfu-util' Output</source>
<translation>Salida de 'dfu-util'</translation>
</message>
<message>
- <location filename="../MicroPython/PyBoardDevices.py" line="348"/>
+ <location filename="../MicroPython/PyBoardDevices.py" line="357"/>
<source>List DFU capable Devices</source>
<translation>Listar Dispositivos con capacidad DFU</translation>
</message>
<message>
- <location filename="../MicroPython/PyBoardDevices.py" line="370"/>
+ <location filename="../MicroPython/PyBoardDevices.py" line="379"/>
<source>MicroPython Firmware Files (*.dfu);;All Files (*)</source>
<translation>Archivos de Firmware MicroPython (*.dfu);;Todos los Archivos (*)</translation>
</message>
@@ -73822,6 +73842,149 @@
</message>
</context>
<context>
+ <name>UF2FlashDialog</name>
+ <message>
+ <location filename="../MicroPython/UF2FlashDialog.ui" line="14"/>
+ <source>Flash UF2 Device</source>
+ <translation type="unfinished"></translation>
+ </message>
+ <message>
+ <location filename="../MicroPython/UF2FlashDialog.ui" line="25"/>
+ <source>Detected Devices:</source>
+ <translation type="unfinished"></translation>
+ </message>
+ <message>
+ <location filename="../MicroPython/UF2FlashDialog.ui" line="38"/>
+ <source>Select the device to be flashed</source>
+ <translation type="unfinished"></translation>
+ </message>
+ <message>
+ <location filename="../MicroPython/UF2FlashDialog.ui" line="45"/>
+ <source>MicroPython:</source>
+ <translation type="unfinished">MicroPython:</translation>
+ </message>
+ <message>
+ <location filename="../MicroPython/UF2FlashDialog.ui" line="61"/>
+ <source>Enter the path of the MicroPython / CircuitPython firmware file</source>
+ <translation type="unfinished"></translation>
+ </message>
+ <message>
+ <location filename="../MicroPython/UF2FlashDialog.ui" line="68"/>
+ <source>'Boot' Path:</source>
+ <translation type="unfinished"></translation>
+ </message>
+ <message>
+ <location filename="../MicroPython/UF2FlashDialog.ui" line="84"/>
+ <source>Enter the path of the bootloader volume</source>
+ <translation type="unfinished"></translation>
+ </message>
+ <message>
+ <location filename="../MicroPython/UF2FlashDialog.ui" line="93"/>
+ <source>Flash MicroPython / CircuitPython</source>
+ <translation type="unfinished"></translation>
+ </message>
+ <message>
+ <location filename="../MicroPython/UF2FlashDialog.ui" line="140"/>
+ <source>Refresh</source>
+ <translation type="unfinished"></translation>
+ </message>
+ <message>
+ <location filename="../MicroPython/UF2FlashDialog.py" line="288"/>
+ <source><h3>CircuitPython Board</h3><p>In order to prepare the board for flashing follow these steps:</p><ol><li>Switch your device to 'bootloader' mode by double-pressing the reset button.</li><li>Wait until the device has entered 'bootloader' mode.</li><li>(If this does not happen, then try shorter or longer pauses between presses.)</li><li>Ensure the boot volume is available (this may require mounting it).</li><li>Select the firmware file to be flashed and click the flash button.</li></ol></source>
+ <translation type="unfinished"></translation>
+ </message>
+ <message>
+ <location filename="../MicroPython/UF2FlashDialog.py" line="311"/>
+ <source><h3>Pi Pico (RP2040) Board</h3><p>In order to prepare the board for flashing follow these steps:</p><ol><li>Plug in your board while holding the BOOTSEL button.</li><li>Wait until the device has entered 'bootloader' mode.</li><li>Ensure the boot volume is available (this may require mounting it).</li><li>Select the firmware file to be flashed and click the flash button.</li></ol></source>
+ <translation type="unfinished"></translation>
+ </message>
+ <message>
+ <location filename="../MicroPython/UF2FlashDialog.py" line="386"/>
+ <source>MicroPython/CircuitPython Files (*.uf2);;All Files (*)</source>
+ <translation type="unfinished"></translation>
+ </message>
+ <message>
+ <location filename="../MicroPython/UF2FlashDialog.py" line="454"/>
+ <source>Manual Select</source>
+ <translation type="unfinished">Selección Manual</translation>
+ </message>
+ <message>
+ <location filename="../MicroPython/UF2FlashDialog.py" line="555"/>
+ <source>Reset Instructions:</source>
+ <translation type="unfinished"></translation>
+ </message>
+ <message>
+ <location filename="../MicroPython/UF2FlashDialog.py" line="499"/>
+ <source><h4>No known devices detected.</h4><p>Follow the appropriate instructions below to set <b>one</b> board into 'bootloader' mode. Press <b>Refresh</b> when ready.</p></source>
+ <translation type="unfinished"></translation>
+ </message>
+ <message>
+ <location filename="../MicroPython/UF2FlashDialog.py" line="522"/>
+ <source><h4>Flash {0} Firmware</h4><p>Follow the instructions below to set <b>one</b> board into 'bootloader' mode. Press <b>Refresh</b> when ready.</p><hr/>{1}</source>
+ <translation type="unfinished"></translation>
+ </message>
+ <message>
+ <location filename="../MicroPython/UF2FlashDialog.py" line="532"/>
+ <source><h4>Potentially UF2 capable devices found</h4><p>Found these potentially UF2 capable devices:</p><ul><li>{0}</li></ul><p>Follow the instructions below to set <b>one</b> board into 'bootloader' mode. Press <b>Refresh</b> when ready.</p></source>
+ <translation type="unfinished"></translation>
+ </message>
+ <message>
+ <location filename="../MicroPython/UF2FlashDialog.py" line="557"/>
+ <source><h4>No known devices detected.</h4><p>Follow the instructions below to set <b>one</b> board into 'bootloader' mode. Press <b>Refresh</b> when ready.</p></source>
+ <translation type="unfinished"></translation>
+ </message>
+ <message>
+ <location filename="../MicroPython/UF2FlashDialog.py" line="569"/>
+ <source>Flash Instructions:</source>
+ <translation type="unfinished"></translation>
+ </message>
+ <message>
+ <location filename="../MicroPython/UF2FlashDialog.py" line="594"/>
+ <source>Boot Volume not found:</source>
+ <translation type="unfinished"></translation>
+ </message>
+ <message>
+ <location filename="../MicroPython/UF2FlashDialog.py" line="596"/>
+ <source><h4>No Boot Volume detected.</h4><p>Please ensure that the boot volume of the device to be flashed is available. </source>
+ <translation type="unfinished"></translation>
+ </message>
+ <message>
+ <location filename="../MicroPython/UF2FlashDialog.py" line="602"/>
+ <source>This volume should be named <b>{0}</b>. Press <b>Refresh</b> when ready.</p></source>
+ <translation type="unfinished"></translation>
+ </message>
+ <message>
+ <location filename="../MicroPython/UF2FlashDialog.py" line="607"/>
+ <source>This volume should have one of these names.</p><ul><li>{0}</li></ul><p>Press <b>Refresh</b> when ready.</p></source>
+ <translation type="unfinished"></translation>
+ </message>
+ <message>
+ <location filename="../MicroPython/UF2FlashDialog.py" line="624"/>
+ <source>Multiple Boot Volumes found:</source>
+ <translation type="unfinished"></translation>
+ </message>
+ <message>
+ <location filename="../MicroPython/UF2FlashDialog.py" line="626"/>
+ <source><h4>Multiple Boot Volumes were found</h4><p>These volume paths were found.</p><ul><li>{0}</li></ul><p>Please ensure that only one device of a type is ready for flashing. Press <b>Refresh</b> when ready.</p></source>
+ <translation type="unfinished"></translation>
+ </message>
+ <message>
+ <location filename="../MicroPython/UF2FlashDialog.py" line="645"/>
+ <source>Flashing {0}</source>
+ <translation type="unfinished"></translation>
+ </message>
+ <message>
+ <location filename="../MicroPython/UF2FlashDialog.py" line="571"/>
+ <source><h4>Flash method 'manual' selected.</h4><p>Follow the instructions below to flash a device by entering the data manually.</p><ol><li>Change the device to 'bootloader' mode.</li><li>Wait until the device has entered 'bootloader' mode.</li><li>Ensure the boot volume is available (this may require mounting it) and select its path.</li><li>Select the firmware file to be flashed and click the flash button.</li></ol></source>
+ <translation type="unfinished"></translation>
+ </message>
+ <message>
+ <location filename="../MicroPython/UF2FlashDialog.py" line="647"/>
+ <source><p>Flashing the {0} firmware to the device. Please wait until the device resets automatically.</p></source>
+ <translation type="unfinished"></translation>
+ </message>
+</context>
+<context>
<name>UIPreviewer</name>
<message>
<location filename="../Tools/UIPreviewer.py" line="320"/>
