Mercurial Repositories > eric / file revision

# -*- coding: utf-8 -*-

# Copyright (c) 2021 Detlev Offenbach <detlev@die-offenbachs.de>
#

"""
Module implementing a dialog to flash any UF2 capable device.
"""

import os
import shutil

from PyQt5.QtCore import pyqtSlot, Qt, QCoreApplication, QThread, QEventLoop
from PyQt5.QtWidgets import QDialog

from E5Gui.E5PathPicker import E5PathPickerModes

from .Ui_UF2FlashDialog import Ui_UF2FlashDialog

import UI.PixmapCache
import Utilities

from . import MicroPythonDevices

SupportedUF2Boards = {
    "circuitpython": {
        "volumes": {
            (0x03EB, 0x2402): [
                "SAMD21",         # SAMD21 Board
                "SAME54",         # SAME54 Board
            ],
            (0x04D8, 0xEC44): [
                "PYCUBEDBOOT",    # PyCubedv04
            ],
            (0x04D8, 0xEC63): [
                "BOOT",           # CircuitBrains Basic
            ],
            (0x04D8, 0xEC64): [
                "BOOT",           # CircuitBrains Deluxe
            ],
            (0x04D8, 0xED5F): [
                "UCHIPYBOOT",     # uChip CircuitPython
            ],
            (0x04D8, 0xEDB3): [
                "USBHUBBOOT",     # Programmable USB Hub
            ],
            (0x04D8, 0xEDBE): [
                "SAM32BOOT",      # SAM32
            ],
            (0x04D8, 0xEF66): [
                "SENSEBOX",       # senseBox MCU
            ],
            (0x1209, 0x2017): [
                "MINISAMBOOT",    # Mini SAM M4
            ],
            (0x1209, 0x3252): [
                "MCBS2OMBOOT",    # Module Clip w/Wroom
            ],
            (0x1209, 0x3253): [
                "MCBS2ERBOOT",    # Module Clip w/Wrover
            ],
            (0x1209, 0x4D44): [
                "ROBOM0BOOT",     # Robo HAT MM1
                "ROBOM4BOOT",     # Robo HAT MM1 M4
            ],
            (0x1209, 0x4DDD): [
                "SapBOOT",        # CP Sapling
            ],
            (0x1209, 0x7102): [
                "MINISAMBOOT",    # Mini SAM M0
            ],
            (0x1209, 0x805A): [
                "BASTBLE",        # Bast BLE
            ],
            (0x1209, 0xE3E2): [
                "StackRduino",    # StackRduino M0 PRO
            ],
            (0x1209, 0xF501): [
                "M4SHIMBOOT",     # M4-Shim
            ],
            (0x15BA, 0x28DC): [
                "OLMLIPOBOOT",    # ESP32S2 DevKit Lipo
            ],
            (0x16D0, 0x0CDA): [
                "AUTOMAT",        # automat
            ],
            (0x1B4F, 0x0019): [
                "QwiicMicro",     # Sparkfun Qwiic Micro
            ],
            (0x1B4F, 0x0D22): [
                "SPARKFUN",       # Sparkfun SAMD21 Mini Breakout
            ],
            (0x1B4F, 0x0D23): [
                "SPARKFUN",       # Sparkfun SAMD21 Dev Breakout
            ],
            (0x1D50, 0x6110): [
                "ROBOTICS",       # Robotics
            ],
            (0x1D50, 0x6112): [
                "RCBOOT",         # Wattuino RC
            ],
            (0x1D50, 0x6160): [
                "BLUEMICRO",      # BlueMicro
            ],
            (0x1FC9, 0x0094): [
                "DblM33BOOT",     # Double M33
                "LPC5528BOOT",    # LPCXpresso 55s28
                "LPC5569BOOT",    # LPCXpresso 55s69
            ],
            (0x230A, 0x00E9): [
                "TAU_BOOT",       # Tau
            ],
            (0x2341, 0x0057): [
                "NANOBOOT",       # NANO 33 IoT
            ],
            (0x2341, 0x8053): [
                "MKR1300",        # MKR1300
            ],
            (0x239A, 0x000F): [
                "ITSYBOOT",       # ItsyBitsy M0 Express
            ],
            (0x239A, 0x0013): [
                "METROBOOT",      # Metro M0
            ],
            (0x239A, 0x0015): [
                "FEATHERBOOT",    # Feather M0
            ],
            (0x239A, 0x0018): [
                "CPLAYBOOT",      # CPlay Express
            ],
            (0x239A, 0x001B): [
                "FEATHERBOOT",    # Feather M0 Express
            ],
            (0x239A, 0x001C): [
                "GEMMABOOT",      # Gemma M0
            ],
            (0x239A, 0x001E): [
                "TRINKETBOOT",    # Trinket M0
            ],
            (0x239A, 0x0021): [
                "METROM4BOOT",    # Metro M4 Express
            ],
            (0x239A, 0x0022): [
                "ARCADE-D5",      # Feather Arcade D51
                "FEATHERBOOT",    # Feather M4 Express
            ],
            (0x239A, 0x0024): [
                "RADIOBOOT",      # Radiofruit M0
            ],
            (0x239A, 0x0027): [
                "PIRKEYBOOT",     # pIRKey M0
            ],
            (0x239A, 0x0029): [
                "ARGONBOOT  ",    # Argon
                "BORONBOOT  ",    # Boron
                "FTHR840BOOT",    # Feather nRF52840 Express
                "MDBT50QBOOT",    # Raytac MDBT50Q-RX
                "MDK840DONGL",    # MDK nRF52840 USB Dongle
                "WS52840EVK",     # Waveshare nRF52840 Eval
                "XENONBOOT  ",    # Xenon
            ],
            (0x239A, 0x002B): [
                "ARCADE-D5",      # Itsy Arcade D51
                "ITSYM4BOOT",     # ItsyBitsy M4 Express
            ],
            (0x239A, 0x002D): [
                "CRICKITBOOT",    # crickit
            ],
            (0x239A, 0x002F): [
                "TRELM4BOOT",     # Trellis M4 Express
            ],
            (0x239A, 0x0031): [
                "GCM4BOOT",       # Grand Central M4 Express
            ],
            (0x239A, 0x0033): [
                "PYBADGEBOOT",    # PyBadge
            ],
            (0x239A, 0x0034): [
                "BADGELCBOOT",    # BadgeLC
                "PEWBOOT",        # PewPew
            ],
            (0x239A, 0x0035): [
                "MKRZEROBOOT",    # MKRZero
                "PORTALBOOT",     # PyPortal M4 Express
            ],
            (0x239A, 0x0037): [
                "METROM4BOOT",    # Metro M4 AirLift
            ],
            (0x239A, 0x003D): [
                "PYGAMERBOOT",    # PyGamer
            ],
            (0x239A, 0x003F): [
                "METR840BOOT",    # Metro nRF52840 Express
            ],
            (0x239A, 0x0045): [
                "CPLAYBTBOOT",    # Circuit Playground nRF52840
            ],
            (0x239A, 0x0047): [
                "MASKM4BOOT",     # Hallowing Mask M4
            ],
            (0x239A, 0x0049): [
                "HALLOM4BOOT",    # HalloWing M4
            ],
            (0x239A, 0x004D): [
                "SNEKBOOT",       # snekboard
            ],
            (0x239A, 0x0051): [
                "ITSY840BOOT",    # ItsyBitsy nRF52840 Express
            ],
            (0x239A, 0x0057): [
                "SERPENTBOOT",    # Serpente
            ],
            (0x239A, 0x0059): [
                "FTHR405BOOT",    # Feather STM32F405 Express
            ],
            (0x239A, 0x005D): [
                "BlackPill",      # STM32F401CxUx
                "STMF411BOOT",    # STM32F411 Discovery
            ],
            (0x239A, 0x0061): [
                "SOLBOOT",        # Sol
            ],
            (0x239A, 0x0063): [
                "NANO33BOOT",     # Nano 33 BLE
            ],
            (0x239A, 0x0065): [
                "ND6BOOT",        # ndBit6
            ],
            (0x239A, 0x006B): [
                "shIRtty",        # shIRtty
            ],
            (0x239A, 0x0071): [
                "CLUEBOOT",       # CLUE nRF52840
            ],
            (0x239A, 0x0077): [
                "RT1010BOOT",     # RT1010 EVK
            ],
            (0x239A, 0x0079): [
                "ARAMBOOT",       # ARAMCON Badge 2019
            ],
            (0x239A, 0x007D): [
                "BOOKBOOT",       # The Open Book Feather
            ],
            (0x239A, 0x007F): [
                "BADGEBOOT",      # OHS2020 Badge
            ],
            (0x239A, 0x0081): [
                "RT1020BOOT",     # RT1020 EVK
            ],
            (0x239A, 0x0083): [
                "RT1060BOOT",     # RT1060 EVK
            ],
            (0x239A, 0x0087): [
                "FTHRSNSBOOT",    # Feather nRF52840 Sense
            ],
            (0x239A, 0x0093): [
                "ISVITABoot",     # IkigaiSense Vita nRF52840
            ],
            (0x239A, 0x0095): [
                "UARTLOGBOOT",    # UARTLogger II
            ],
            (0x239A, 0x009F): [
                "ADM840BOOT",     # AtelierDuMaker NRF52840 Breakout
            ],
            (0x239A, 0x00A5): [
                "SAOLA1RBOOT",    # Saola 1R WROVER
            ],
            (0x239A, 0x00A7): [
                "SAOLA1MBOOT",    # Saola 1M WROOM
            ],
            (0x239A, 0x00AB): [
                "UFTHRS2BOOT",    # FeatherS2
            ],
            (0x239A, 0x00AF): [
                "FLUFFBOOT",      # Fluff M0
            ],
            (0x239A, 0x00B3): [
                "NICENANO",       # nice!nano
            ],
            (0x239A, 0x00B5): [
                "E54XBOOT",       # SAME54 Xplained
            ],
            (0x239A, 0x00B9): [
                "ND7BOOT",        # ndBit7
            ],
            (0x239A, 0x00BF): [
                "BADGEBOOT",      # BLM Badge
            ],
            (0x239A, 0x00C3): [
                "GEMINIBOOT",     # Gemini
            ],
            (0x239A, 0x00C5): [
                "MICROS2BOOT",    # microS2
            ],
            (0x239A, 0x00C7): [
                "KALUGA1BOOT",    # Kaluga 1
            ],
            (0x239A, 0x00CB): [
                "QTPY_BOOT",      # QT Py M0
            ],
            (0x239A, 0x00CD): [
                "FTHRCANBOOT",    # Feather M4 CAN Express
            ],
            (0x239A, 0x00DF): [
                "METROS2BOOT",    # Metro ESP32-S2
            ],
            (0x239A, 0x00E1): [
                "METROM7BOOT",    # Metro M7 1011
            ],
            (0x239A, 0x00E5): [
                "MAGTAGBOOT",     # Metro MagTag 2.9 Grayscale
            ],
            (0x239A, 0x00EB): [
                "FTHRS2BOOT",     # Feather ESP32-S2
            ],
            (0x239A, 0x00ED): [
                "FTHRS2BOOT",     # Feather ESP32-S2 Reverse TFT
            ],
            (0x239A, 0x00EF): [
                "TRINKEYBOOT",    # NeoPixel Trinkey M0
            ],
            (0x239A, 0x00F5): [
                "STARBOOT",       # Binary Star
            ],
            (0x239A, 0xB000): [
                "HALLOWBOOT",     # Hallowing M0
            ],
            (0x239A, 0xE005): [
                "HONKBOOT",       # Big Honking Button
            ],
            (0x2886, 0x000D): [
                "Grove Zero",     # Grove Zero
            ],
            (0x2886, 0x002F): [
                "Seeed XIAO",     # Seeeduino XIAO
                "Arduino",        # Seeeduino XIAO (old bootloader)
            ],
            (0x2886, 0xF00E): [
                "PITAYAGO",       # Pitaya Go
            ],
            (0x2886, 0xF00F): [
                "nRF52840M2",     # MakerDiary nRF52840 M.2 Module
            ],
            (0x303A, 0x8008): [
                "TTGOS2BOOT",     # TTGO_T8_S2_Display
            ],
            (0x303A, 0x800E): [
                "CCMBRISBOOT",    # CucumberRIS v1.1
            ],
            (0x3171, 0x0100): [
                "CMDBOOT",        # COMMANDER
            ],
            (0xCAFE, 0xFFFF): [
                "F303BOOT",       # STM32F303 Discovery
            ],
        },
        "instructions": QCoreApplication.translate(
            "UF2FlashDialog",
            "<h3>CircuitPython Board</h3>"
            "<p>In order to prepare the board for flashing follow these"
            " steps:</p><ol>"
            "<li>Switch your device to 'bootloader' mode by double-pressing"
            " the reset button.</li>"
            "<li>Wait until the device has entered 'bootloader' mode.</li>"
            "<li>(If this does not happen, then try shorter or longer"
            " pauses between presses.)</li>"
            "<li>Ensure the boot volume is available (this may require"
            " mounting it).</li>"
            "<li>Select the firmware file to be flashed and click the"
            " flash button.</li>"
            "</ol>"
        ),
        "show_all": True,
        "firmware": "CircuitPython",
    },
    
    "circuitpython_rp2040": {
        "volumes": {
            (0x239A, 0x80F4): [
                "RPI-RP2",        # Raspberry Pi Pico loaded with CircuitPython
            ],
        },
        "instructions": QCoreApplication.translate(
            "UF2FlashDialog",
            "<h3>Pi Pico (RP2040) Board</h3>"
            "<p>In order to prepare the board for flashing follow these"
            " steps:</p><ol>"
            "<li>Enter 'bootloader' mode (board <b>without</b> RESET button):"
            "<ul>"
            "<li>Plug in your board while holding the BOOTSEL button.</li>"
            "</ul>"
            "Enter 'bootloader' mode (board <b>with</b> RESET button):"
            "<ul>"
            "<li>hold down RESET</li>"
            "<li>hold down BOOTSEL</li>"
            "<li>release RESET</li>"
            "<li>release BOOTSEL</li>"
            "</ul></li>"
            "<li>Wait until the device has entered 'bootloader' mode.</li>"
            "<li>Ensure the boot volume is available (this may require"
            " mounting it).</li>"
            "<li>Select the firmware file to be flashed and click the"
            " flash button.</li>"
            "</ol>"
        ),
        "show_all": False,
        "firmware": "CircuitPython",
    },
    
    "rp2040": {
        "volumes": {
            (0x0000, 0x0000): [
                "RPI-RP2",        # Raspberry Pi Pico does not present a TTY
            ],
        },
        "instructions": QCoreApplication.translate(
            "UF2FlashDialog",
            "<h3>Pi Pico (RP2040) Board</h3>"
            "<p>In order to prepare the board for flashing follow these"
            " steps:</p><ol>"
            "<li>Enter 'bootloader' mode (board <b>without</b> RESET button):"
            "<ul>"
            "<li>Plug in your board while holding the BOOTSEL button.</li>"
            "</ul>"
            "Enter 'bootloader' mode (board <b>with</b> RESET button):"
            "<ul>"
            "<li>hold down RESET</li>"
            "<li>hold down BOOTSEL</li>"
            "<li>release RESET</li>"
            "<li>release BOOTSEL</li>"
            "</ul></li>"
            "<li>Wait until the device has entered 'bootloader' mode.</li>"
            "<li>Ensure the boot volume is available (this may require"
            " mounting it).</li>"
            "<li>Select the firmware file to be flashed and click the"
            " flash button.</li>"
            "</ol>"
        ),
        "show_all": True,
        "firmware": "MicroPython / CircuitPython",
    },
}


def getFoundDevices(boardType=""):
    """
    Function to get the list of known serial devices supporting UF2.
    
    @param boardType specific board type to search for
    @type str
    @return list of tuples with the board type, the port description, the
        VID and PID
    @rtype list of tuple of (str, str, int, int)
    """
    from PyQt5.QtSerialPort import QSerialPortInfo
    
    foundDevices = []
    
    availablePorts = QSerialPortInfo.availablePorts()
    for port in availablePorts:
        vid = port.vendorIdentifier()
        pid = port.productIdentifier()
        
        if vid == 0 and pid == 0:
            # no device detected at port
            continue
        
        for board in SupportedUF2Boards:
            if not boardType or (board.startswith(boardType)):
                if (vid, pid) in SupportedUF2Boards[board]["volumes"]:
                    foundDevices.append((
                        board,
                        port.description(),
                        (vid, pid),
                    ))
    
    # second run for boards needing special treatment (e.g. RP2040)
    for board in SupportedUF2Boards:
        if not boardType or (board == boardType):
            try:
                # find mounted volume
                volumes = SupportedUF2Boards[board]["volumes"][(0, 0)]
                foundVolumes = []
                for volume in volumes:
                    foundVolumes += Utilities.findVolume(volume, findAll=True)
                if foundVolumes:
                    foundDevices.append((
                        board,
                        QCoreApplication.translate(
                            "UF2FlashDialog", "'{0}' Board").format(board),
                        (0, 0),             # VID/PID of (0, 0) is special
                    ))
            except KeyError:
                # no special treatment required, carry on
                pass
    
    return foundDevices


class UF2FlashDialog(QDialog, Ui_UF2FlashDialog):
    """
    Class implementing a dialog to flash any UF2 capable device.
    """
    DeviceTypeRole = Qt.ItemDataRole.UserRole
    DeviceVidPidRole = Qt.ItemDataRole.UserRole + 1
    
    def __init__(self, boardType="", parent=None):
        """
        Constructor
        
        @param boardType specific board type to show the dialog for
        @type str
        @param parent reference to the parent widget (defaults to None)
        @type QWidget (optional)
        """
        super(UF2FlashDialog, self).__init__(parent)
        self.setupUi(self)
        
        self.refreshButton.setIcon(UI.PixmapCache.getIcon("rescan"))
        
        self.firmwarePicker.setMode(E5PathPickerModes.OpenFileMode)
        self.firmwarePicker.setFilters(
            self.tr("MicroPython/CircuitPython Files (*.uf2);;"
                    "All Files (*)"))
        
        self.bootPicker.setMode(E5PathPickerModes.DirectoryShowFilesMode)
        self.bootPicker.setEnabled(False)
        
        self.__mandatoryStyleSheet = (
            "QLineEdit {border: 2px solid;border-color: #800000}"
        )
        self.__manualType = "<manual>"
        
        self.__boardType = boardType
        
        self.__populate()
        
        self.__updateFlashButton()
    
    def __populate(self):
        """
        Private method to (re-)populate the dialog.
        """
        # save the currently selected device
        currentDevice = self.devicesComboBox.currentText()
        firmwareFile = self.firmwarePicker.text()
        
        # clear the entries first
        self.devicesComboBox.clear()
        self.firmwarePicker.clear()
        self.bootPicker.clear()
        self.infoLabel.clear()
        self.infoEdit.clear()
        
        # now populate the entries with data
        devices = getFoundDevices(boardType=self.__boardType)
        if len(devices) == 0:
            # no device detected
            devices = list(filter(
                lambda x: x[0] in SupportedUF2Boards,
                MicroPythonDevices.getFoundDevices()[0]
            ))
            if devices:
                self.__showSpecificInstructions(list(devices))
            else:
                self.__showAllInstructions()
            self.devicesComboBox.addItem("")
            self.devicesComboBox.addItem(self.tr("Manual Select"))
            self.devicesComboBox.setItemData(1, self.__manualType,
                                             self.DeviceTypeRole)
        elif len(devices) == 1:
            # set the board type to the found one
            self.__boardType = devices[0][0]
            
            self.devicesComboBox.addItem(devices[0][1])
            self.devicesComboBox.setItemData(
                0, devices[0][0], self.DeviceTypeRole)
            self.devicesComboBox.setItemData(
                0, devices[0][2], self.DeviceVidPidRole)
            self.devicesComboBox.addItem(self.tr("Manual Select"))
            self.devicesComboBox.setItemData(1, self.__manualType,
                                             self.DeviceTypeRole)
            self.on_devicesComboBox_currentIndexChanged(0)
        else:
            self.devicesComboBox.addItem("")
            for index, (boardType, description,
                        vidpid) in enumerate(sorted(devices), 1):
                self.devicesComboBox.addItem(description)
                self.devicesComboBox.setItemData(
                    index, boardType, self.DeviceTypeRole)
                self.devicesComboBox.setItemData(
                    index, vidpid, self.DeviceVidPidRole)
            self.devicesComboBox.addItem(self.tr("Manual Select"))
            self.devicesComboBox.setItemData(index + 1, self.__manualType,
                                             self.DeviceTypeRole)
        
        # reselect the remembered device, if it is still there
        if currentDevice:
            self.devicesComboBox.setCurrentText(currentDevice)
            self.firmwarePicker.setText(firmwareFile)
        else:
            self.devicesComboBox.setCurrentIndex(0)
    
    def __updateFlashButton(self):
        """
        Private method to update the state of the Flash button and the retest
        button.
        """
        firmwareFile = self.firmwarePicker.text()
        if self.devicesComboBox.currentData(self.DeviceTypeRole) is not None:
            if bool(firmwareFile) and os.path.exists(firmwareFile):
                self.firmwarePicker.setStyleSheet("")
            else:
                self.firmwarePicker.setStyleSheet(self.__mandatoryStyleSheet)
            
            if bool(self.bootPicker.text()):
                self.bootPicker.setStyleSheet("")
            else:
                self.bootPicker.setStyleSheet(self.__mandatoryStyleSheet)
        else:
            self.firmwarePicker.setStyleSheet("")
            self.bootPicker.setStyleSheet("")
        
        enable = (
            bool(self.bootPicker.text()) and
            bool(firmwareFile) and
            os.path.exists(firmwareFile)
        )
        self.flashButton.setEnabled(enable)
    
    def __showAllInstructions(self):
        """
        Private method to show instructions for resetting devices to bootloader
        mode.
        """
        self.infoLabel.setText(self.tr("Reset Instructions:"))
        
        htmlText = self.tr(
            "<h4>No known devices detected.</h4>"
            "<p>Follow the appropriate instructions below to set <b>one</b>"
            " board into 'bootloader' mode. Press <b>Refresh</b> when ready."
            "</p>"
        )
        for boardType in SupportedUF2Boards:
            if SupportedUF2Boards[boardType]["show_all"]:
                htmlText += (
                    "<hr/>" +
                    SupportedUF2Boards[boardType]["instructions"]
                )
        self.infoEdit.setHtml(htmlText)
    
    def __showSpecificInstructions(self, devices):
        """
        Private method to show instructions for resetting devices to bootloader
        mode for a list of detected devices.
        
        @param devices list of detected devices
        @type list of str
        """
        boardTypes = {x[0] for x in devices}
        
        self.infoLabel.setText(self.tr("Reset Instructions:"))
        
        if self.__boardType:
            htmlText = self.tr(
                "<h4>Flash {0} Firmware</h4>"
                "<p>Follow the instructions below to set <b>one</b> board into"
                " 'bootloader' mode. Press <b>Refresh</b> when ready.</p>"
                "<hr/>{1}"
            ).format(
                SupportedUF2Boards[self.__boardType]["firmware"],
                SupportedUF2Boards[self.__boardType]["instructions"],
            )
        else:
            htmlText = self.tr(
                "<h4>Potentially UF2 capable devices found</h4>"
                "<p>Found these potentially UF2 capable devices:</p>"
                "<ul><li>{0}</li></ul>"
                "<p>Follow the instructions below to set <b>one</b> board into"
                " 'bootloader' mode. Press <b>Refresh</b> when ready.</p>"
            ).format(
                "</li><li>".join(sorted(x[1] for x in devices))
            )
            for boardType in sorted(boardTypes):
                htmlText += (
                    "<hr/>" + SupportedUF2Boards[boardType]["instructions"]
                )
        self.infoEdit.setHtml(htmlText)
    
    def __showTypedInstructions(self, boardType):
        """
        Private method to show instructions for resetting devices to bootloader
        mode for a specific board type.
        
        @param boardType type of the board to show instructions for
        @type str
        """
        self.infoLabel.setText(self.tr("Reset Instructions:"))
        
        htmlText = self.tr(
            "<h4>No known devices detected.</h4>"
            "<p>Follow the instructions below to set <b>one</b> board into"
            " 'bootloader' mode. Press <b>Refresh</b> when ready.</p>"
        )
        htmlText += "<hr/>" + SupportedUF2Boards[boardType]["instructions"]
        self.infoEdit.setHtml(htmlText)
    
    def __showManualInstructions(self):
        """
        Private method to show instructions for flashing devices manually.
        """
        self.infoLabel.setText(self.tr("Flash Instructions:"))
        
        htmlText = self.tr(
            "<h4>Flash method 'manual' selected.</h4>"
            "<p>Follow the instructions below to flash a device by entering"
            " the data manually.</p><ol>"
            "<li>Change the device to 'bootloader' mode.</li>"
            "<li>Wait until the device has entered 'bootloader' mode.</li>"
            "<li>Ensure the boot volume is available (this may require"
            " mounting it) and select its path.</li>"
            "<li>Select the firmware file to be flashed and click the"
            " flash button.</li>"
            "</ol>"
        )
        for boardType in SupportedUF2Boards:
            htmlText += "<hr/>" + SupportedUF2Boards[boardType]["instructions"]
        self.infoEdit.setHtml(htmlText)
    
    def __showNoVolumeInformation(self, volumes, boardType):
        """
        Private method to show information about the expected boot volume(s).
        
        @param volumes list of expected volume names
        @type list of str
        @param boardType type of the board to show instructions for
        @type str
        """
        self.infoLabel.setText(self.tr("Boot Volume not found:"))
        
        htmlText = self.tr(
            "<h4>No Boot Volume detected.</h4>"
            "<p>Please ensure that the boot volume of the device to be flashed"
            " is available. "
        )
        if len(volumes) == 1:
            htmlText += self.tr(
                "This volume should be named <b>{0}</b>."
                " Press <b>Refresh</b> when ready.</p>"
            ).format(volumes[0])
        else:
            htmlText += self.tr(
                "This volume should have one of these names.</p>"
                "<ul><li>{0}</li></ul>"
                "<p>Press <b>Refresh</b> when ready.</p>"
            ).format("</li><li>".join(sorted(volumes)))
        
        if boardType:
            htmlText += self.tr(
                "<h4>Reset Instructions</h4>"
                "<p>Follow the instructions below to set the board into"
                " 'bootloader' mode. Press <b>Refresh</b> when ready.</p>"
            )
            htmlText += "<hr/>" + SupportedUF2Boards[boardType]["instructions"]
        
        self.infoEdit.setHtml(htmlText)
    
    def __showMultipleVolumesInformation(self, volumePaths):
        """
        Private method to show information because multiple devices of the
        same type are ready for flashing.
        
        Note: This is a dangerous situation!
        
        @param volumePaths list of volume paths
        @type list of str
        """
        self.infoLabel.setText(self.tr("Multiple Boot Volumes found:"))
        
        htmlText = self.tr(
            "<h4>Multiple Boot Volumes were found</h4>"
            "<p>These volume paths were found.</p><ul><li>{0}</li></ul>"
            "<p>Please ensure that only one device of a type is ready for"
            " flashing. Press <b>Refresh</b> when ready.</p>"
        ).format("</li><li>".join(sorted(volumePaths)))
        self.infoEdit.setHtml(htmlText)
    
    @pyqtSlot()
    def on_flashButton_clicked(self):
        """
        Private slot to flash the selected MicroPython or CircuitPython
        firmware onto the device.
        """
        boardType = self.devicesComboBox.currentData(self.DeviceTypeRole)
        firmwarePath = self.firmwarePicker.text()
        volumePath = self.bootPicker.text()
        if os.path.exists(firmwarePath) and os.path.exists(volumePath):
            if boardType == self.__manualType:
                self.infoLabel.setText(self.tr("Flashing Firmware"))
                self.infoEdit.setHtml(self.tr(
                    "<p>Flashing the selected firmware to the device. Please"
                    " wait until the device resets automatically.</p>")
                )
            else:
                firmwareType = SupportedUF2Boards[boardType]["firmware"]
                self.infoLabel.setText(
                    self.tr("Flashing {0}").format(firmwareType))
                self.infoEdit.setHtml(self.tr(
                    "<p>Flashing the {0} firmware to the device. Please wait"
                    " until the device resets automatically.</p>"
                ).format(firmwareType))
            QCoreApplication.processEvents(
                QEventLoop.ProcessEventsFlag.ExcludeUserInputEvents)
            shutil.copy2(firmwarePath, volumePath)
            QThread.sleep(1)
            self.on_refreshButton_clicked()
    
    @pyqtSlot()
    def on_refreshButton_clicked(self):
        """
        Private slot to refresh the dialog.
        """
        # special treatment for RPi Pico
        if self.__boardType == "circuitpython_rp2040":
            self.__boardType = "rp2040"
        
        self.__populate()
    
    @pyqtSlot(int)
    def on_devicesComboBox_currentIndexChanged(self, index):
        """
        Private slot to handle the selection of a board.
        
        @param index selected index
        @type int
        """
        vidpid = self.devicesComboBox.itemData(index, self.DeviceVidPidRole)
        boardType = self.devicesComboBox.itemData(index, self.DeviceTypeRole)
        
        self.bootPicker.setEnabled(boardType == self.__manualType)
        if boardType == self.__manualType:
            self.__showManualInstructions()
        
        if vidpid is None:
            if boardType is None:
                self.bootPicker.clear()
        else:
            volumes = SupportedUF2Boards[boardType]["volumes"][vidpid]
            foundVolumes = []
            for volume in volumes:
                foundVolumes += Utilities.findVolume(volume, findAll=True)
            
            if len(foundVolumes) == 0:
                self.__showNoVolumeInformation(volumes, boardType)
                self.bootPicker.clear()
            elif len(foundVolumes) == 1:
                self.bootPicker.setText(foundVolumes[0])
            else:
                self.__showMultipleVolumesInformation()
                self.bootPicker.clear()
        
        self.__updateFlashButton()
    
    @pyqtSlot(str)
    def on_firmwarePicker_textChanged(self, text):
        """
        Private slot handling a change of the firmware file.
        
        @param text current text of the firmware edit
        @type str
        """
        self.__updateFlashButton()
    
    @pyqtSlot(str)
    def on_bootPicker_textChanged(self, text):
        """
        Private slot handling a change of the boot volume.
        
        @param text current text of the boot volume edit
        @type str
        """
        self.__updateFlashButton()